Master Thesis bonding Calculation for Metal Bonding

vor 2 Wochen


Kematen in Tirol, Österreich Knorr-Bremse Vollzeit

**LOCATION**:
**Kematen** / Austria |
**BRAND**: IFE |
**REQUISITION ID**:
**2073**

IFE is the worldwide leading manufacturer of automatic entrance systems for railway vehicles. Wouldn’t it be great to play an active part in shaping the future of mobility?

**INITIAL SITUATION**- A significant proportion of the door leaves produced by IFE are designed as bonded constructions. Two cover sheets made of aluminum are glued onto the profile frame and the sandwich core.- According to the DIN 6701 bonding standard, a mathematical proof of strength is required for safety-relevant bondings, although the thin-layer adhesives used in cover sheet bonding are difficult to describe in terms of calculation. There is still no regulation or guideline on this.- In order to be prepared for future optimization tasks and for possible changes in the interpretation of the standard, a calculation method for describing door leaf bonding should be found.- In a preliminary work, the CZM (Cohesive Zone Modeling) method was already considered in more detail and the necessary parameters of the adhesive used at IFE were determined.

**TASKS**- Analysis of a simple door leaf and estimation of the critical bonding areas- Define simple specimens with which a loading situation analogous to the critical door leaf areas can be generated.- FE calculation of these specific specimens- Performing or supervising measurements to determine the load limits of the specimens- Comparing the FE results with the values of the measurements- Documenting and interpreting the results

**REQUIREMENTS**- Studies at a technical university or university of applied sciences- Basic knowledge of FEM (Finite Element Method) and fracture mechanics- Initiative- Solution-oriented way of working

**WHAT WE OFFER**

Continuous innovation pushes the technological progress of our automatic entrance systems, which are geared towards quality, safety and reliability, and distinguishes us as an internationally reliable partner.

We offer you an exciting and varied job in an international environment as well as an attractive set of benefits. These range from flexible working time models (up to 50% homeoffice) through professional and personal development opportunities to sports and health care programmes.

The collective agreement minimum salary for this position is EUR 2.057,00 gross per month on a full-time basis.

**ARE YOU INTERESTED?



  • Kematen in Tirol, Österreich Knorr-Bremse Vollzeit

    **LOCATION**: **Kematen** / Austria | **BRAND**: IFE | **REQUISITION ID**: **2074** IFE is the worldwide leading manufacturer of automatic entrance systems for railway vehicles. Wouldn’t it be great to play an active part in shaping the future of mobility? **INITIAL SITUATION**- At IFE, the door leaves are designed as an adhesive construction. Both...


  • Kematen an der Ybbs, Österreich Knorr Bremse Group Vollzeit

    Master thesis "Determination of material Woehler curves for adhesives used at IFE" LOCATION: Kematen / Austria | BRAND: IFE | REQUISITION ID: 2074 | ON-SITE/REMOTE: On-siteEvery IFE product contains far more than just a component for a rail vehicle. IFE develops pioneering system solutions for safe and environmentally friendly mobility. As a company, we are...


  • Kematen an der Ybbs, Österreich Knorr Bremse Group Vollzeit

    Master thesis "Determination of material Woehler curves for adhesives used at IFE" LOCATION: Kematen / Austria | BRAND: IFE | REQUISITION ID: 2074 | ON-SITE/REMOTE: On-siteEvery IFE product contains far more than just a component for a rail vehicle. IFE develops pioneering system solutions for safe and environmentally friendly mobility. As a company, we are...


  • Kematen an der Ybbs, Österreich IFE-CR, a.s. Vollzeit

    INITIAL SITUATIONAt IFE, the door leaves are designed as an adhesive construction. Both thin-film adhesives (for metal bonding) and thick-film adhesives (for window bonding) are used.According to the DIN 6701 bonding standard, a mathematical strength verification is required for safety-relevant bondings.For the fatigue strength proof (time and fatigue...


  • Kematen an der Ybbs, Österreich IFE-CR, a.s. Vollzeit

    INITIAL SITUATIONA significant proportion of the door leaves produced by IFE are designed as bonded constructions. Two cover sheets made of aluminum are glued onto the profile frame and the sandwich core.According to the DIN 6701 bonding standard, a mathematical proof of strength is required for safety-relevant bondings, although the thin-layer adhesives...


  • Kematen in Tirol, Österreich Knorr-Bremse Vollzeit

    **LOCATION**: **Kematen** / Austria | **BRAND**: IFE | **REQUISITION ID**: **2075** IFE is the worldwide leading manufacturer of automatic entrance systems for railway vehicles. Wouldn’t it be great to play an active part in shaping the future of mobility? **TASKS**- Determination of suitable tests for the determination of component Wöhler curves (S-N...


  • Kematen in Tirol, Österreich Knorr-Bremse Vollzeit

    **LOCATION**: **Kematen** / Austria | **BRAND**: IFE | **REQUISITION ID**: **1947** IFE is the worldwide leading manufacturer of automatic entrance systems for railway vehicles. Wouldn’t it be great to play an active part in shaping the future of mobility? **YOUR TASKS** - CREATION... of detailed drawings (sheet metal, castings, plastic parts, profiles...

  • Clerk Repairs

    vor 1 Woche


    Kematen in Tirol, Österreich Knorr-Bremse Vollzeit

    **LOCATION**: **Kematen** / Austria | **BRAND**: IFE | **REQUISITION ID**: **4089** IFE is the worldwide leading manufacturer of automatic entrance systems for railway vehicles. Wouldn’t it be great to play an active part in shaping the future of mobility? **YOUR TASKS**- ACCEPTANCE... of inquiries concerning repairs from operators, vehicle...

  • Clerk Repairs

    Vor 5 Tagen


    Kematen in Tirol, Österreich Knorr-Bremse Vollzeit

    **LOCATION**: Kematen / Austria | BRAND: IFE | REQUISITION ID: 4089 IFE is the worldwide leading manufacturer of automatic entrance systems for railway vehicles. Wouldn’t it be great to play an active part in shaping the future of mobility? YOUR TASKS ACCEPTANCE... of inquiries concerning repairs from operators, vehicle manufacturers and external sales...


  • Kematen in Tirol, Österreich IFE Vollzeit

    **LOCATION**:Kematen** / Austria | **BRAND**: IFE | **REQUISITION ID**:1371** IFE is the worldwide leading manufacturer of automatic entrance systems for railway vehicles. Wouldn’t it be great to play an active part in shaping the future of mobility? **YOUR TASKS** - HANDLING... of import and export in the customs area, documentation - CREATION... and...

  • Flight Model Engineer

    vor 4 Wochen


    Sankt Veit in der Südsteiermark, Österreich EU Vollzeit

    Working languages: GermanJob sector: Manufacture of air and spacecraft and related machineryWork schedule: Full-timeContract type: Contract to hireOccupation: Aircraft maintenance engineerNumber of posts: 1Date Posted: 22/10/2024Job detailsWith AXIS you develop and produce high-end FLIGHT SIMULATORS with the most innovative technologies for pilot training....