Master Thesis: Master Thesis: Elektrische

The topic of the master thesis is focused on experimental work on Electrohydrodynamic (EHD) printer. The EHD printer in question is a beyond state-of-the-art laboratory prototype and offers the possibility to be a part of the ground - breaking research activities. The objective of the thesis is to develop and establish printing process for different types of...

At KAI (Kompetenzzentrum Automobil - und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...

During your thesis project, we expect you to become a growing expert for sensor systems for the fast growing market of **autonomous robotics **. This means you will need to acquire some special knowledge: - Learn about technologies available today for **environmental sensing**: - Improve your skills in **data acquisition **and **signal...

Master Thesis: Magnetic Sensors (f/m/div) At a glance You love technology, a dynamic environment and want to be part of state-of-the-art developments? You are currently studying Electrical Engineering, Computer Science, Physics or a related subject? You are an analytical thinker and creative problem solver and like to drive things forward? Infineon...

Your future responsibilitiesFollowing research topics are at this moment open and subject to be incorporated into several master thesis.A master thesis may incorporate more than one listed topics to a full thesis. For your application please refer to the code referenced with the set of topics.MULTIPHIXExplore the field of WBG devices and dig into device...

During your thesis project, we expect you to become a growing expert for motor drive systems for the fast-growing market of **autonomous robotics. **The overall goal of this thesis is the **investigation of system losses of a motor drive system consisting **of a wide bandgap inverter stage as well as a motor and control unit. This means you will need to...

At KAI, we create reliability test methods and systems. For an **existing power distribution test system **, we plan to extend the functionality in the direction of **mimicking fail-operational **and **highly available power distribution topologies **and build up a **system-level model within Matlabs Simscape **. Therefore, during your thesis project, we...

This thesis will focus on the characterization of the interface between **SiC **and **TiAl3 **by **transmission electron microscopy (TEM) **. The following tasks are involved during the course of this work: - Sample preparation for TEM via focused ion beam (FIB) - Characterization of TiAl3/SiC heterostructures by TEM - Process analysis in collaboration with...

A new liquid density sensor based on our piezoelectric MEMS technology has been developed at SAL. The thesis will focus on proof-of-concept experiments and aims to verify the theoretical model of this liquid density sensor. Tasks - The main tasks consist of characterizing the liquid density sensor, - designing and conducting experiments, - optimizing the...

In your new role you will: - Acquire some special knowledge about **state-of-the-art drones **and their **propulsion systems**: - Develop a **feasibility study **of **a fuel cell driven drone **including optimization of required **sub-components **and **sub-systems**: - Validate the simulation results with **real-world experiments **of **sub-systems **in...

This thesis will focus on **adhesion **and **lifetime investigations **of **new materials **and **processes **for next generation semiconductor products. **Experimental characterization **of **interface strength of thin films **, ranging from microns to sub-microns is of our primary interest. A wide variety of **material interfaces **such as **metals **,...

Master Thesis – Sustainable Packaging of Electronic Patch for Biomedical Applications (f/m/d)In today's world, point-of-care devices such as glucose monitors have become ubiquitous, but their disposal contributes significantly to environmental waste. At SAL, we aim to address this issue by designing eco-friendly point-of-care devices fabricated using...

This thesis will focus on adhesion and lifetime investigations of new materials and processes for next generation semiconductor products. Experimental characterization of interface strength of thin films, ranging from microns to sub-microns is of our primary interest. A wide variety of material interfaces such as metals, ceramics and polymers are possible to...

In your new role you will: - Development of **on-chip photonics **for **trapped-ion quantum processors**: - Simulation of **waveguides **based on **patterned dielectrics **, like SiN or AlO - Fabrication of **photonic test structures** **Further Information** Type of employment: Temporary / Full-time (flexible working hours from Monday to Friday between 6...

Do you want to be part of a highly motivated and international team in a future-oriented company? Are you a motivated and committed Master student from the field of Electronics, Power Electronics, Robotics or Mechatronics or similar? Our team in Villach is looking forward to receiving your applicationJob DescriptionIn this project you will implement a RISC-V...

As part of the Technology Tool Kit project this position focuses on the development of a planning approach that, given a knowledge graph and a set of product requirements, can construct and validate a production plan optimal with respect to a selected criterion. The approach should be able to (a) construct production plans from scratch or a partial plan, (b)...

In this project you will implement a **RISC-V subsystem**. The goal is to work with the **RISC-V architure**works with memories and periperals. In your new role you will: - Work with the **RISC-V´s architecure**: - Define the **subystem**, its **components**and the **configuration**of the **RISC-V architecture**: - Implement the subsystem with...

In your new role you will: - Work with **Quantum mechanical simulations **of **SiC-based defects**: - Work on **simulation models **for **precise magnetic field measurements**: - Support the **design **and **fabrication **of **photonics **and **system-components**: - Support the **SiC wafer fabrication **in a **professional cleanroom** **Further...

Your Future ResponsibilitiesThis master thesis focuses on the characterization of defects in a Silicon Carbide Metal-Oxide-Semiconductor Field-Effect Transistor. For this purpose, an optical experiment shall be set up to measure fluorescence from SiC-chips after laser excitation at cryogenic temperatures in a closed cycle He-cryostat. The work will involve...

Doctoral Thesis: Ion Trap Development (f/m/div) At a glance At Infineon, we are offering a unique opportunity for individuals pursuing a doctoral degree in the field of trapped-ion quantum computing. As part of our growing ion trap systems team, you will have the chance to contribute to the development of highly-scalable trapped-ion quantum processing...