Master Thesis: Design, Layout and Characterization
vor 1 Monat
During your thesis project, we expect you to become a growing expert for design and layout of analog and digital circuits in microelectronic technologies, also performing the characterization measurements foster you to become familiar with the circuits test and statistical analysis. The overall goal of this thesis is a full development of the self-contained module “Truly bidirectional synchronous digital/analog single wire interface”, including final characterization. This means you will need to acquire some special knowledge and perform dedicated tasks:
- Knowledge gathering about **microelectronic technologies**:
- Development of the **mixed signal (analog + digital) circuits**:
- Understanding the design challenges in **ESD and LU **area (electro-static discharge and latch-up)
- Performing the **AMS system simulations **(analog / mixed signal)
- Implementing the layers **layout drawing **using modern CAD tools
- Performing all needed **final pre-silicon verifications **for the tape-out
- Validation of the simulation results with **real-world experiments **on designed chip in lab using modern measurement equipment
- Document your results by writing and submitting your Master Thesis
Special focus will be on the **microelectronics technology understanding **and a **circuit design.
**This thesis has to be written in cooperation with an university.**
**Further Information**
Type of employment: Temporary / Full-time (flexible working hours from Monday to Friday between 6 a.m. and 7 p.m.)
Duration: mind. 6 months
You successfully meet the requirements, if you are a motivated and committed student from the field of **Electrical Engineering, Electronics, Robotics, Mechatronics **or similar. You are best equipped for this task if your profile matches the following criteria:
- Basic theoretical understanding of the **analog circuit design**:
- Some basic understanding of the **digital circuit design**:
- No fear to learn a modern **CAD tools**:
- Knowledge and hands-on experience in **practical lab work**:
- Good **communication **and **organizational **skills
- Communicate well with our international team in **English **(German is also beneficial)
- CV
- Motivation letter
- Certificate of matriculation at a university
- Latest Transcript of records (not older than 6 months)
- Highest completed educational certificate (Bachelor certificate for Master students)
- Reference letter (optional)
More than 5.000 people work at five different sites in Austria.
**Driving decarbonization and digitalization. Together.**
**-Power & Sensor Systems (PSS) drives leading-edge power management, sensing and data transfer capabilities -**
Infineon **PSS **semiconductors play a vital role in enabling intelligent power management, smart sensitivity as well as fast and reliable data processing in an increasingly digitalized world. Our leading-edge power devices make chargers, adapters, power tools and lighting systems smarter, smaller, lighter and more energy-efficient. Our trusted sensors increase the context sensitivity of “things” and systems such as HMI, and our RF chips power fast and reliable data communication.
**We are on a journey to create the best Infineon for everyone.**
This means we embrace diversity and inclusion and welcome everyone for who they are. At Infineon, we offer a working environment characterized by trust, openness, respect and tolerance and are committed to give all applicants and employees equal opportunities. We base our recruiting decisions on the applicant´s experience and skills.
We look forward to receiving your resume, even if you do not entirely meet all the requirements of the job posting.
Please let your recruiter know if they need to pay special attention to something in order to enable your participation in the interview process.
Click here for more information about Diversity & Inclusion at Infineon.
**Infineon Hub - Connect. Create. Challenge.**
The iHub at TU Wien represents an inspiring tech platform, networking area and event location, connecting Infineon Austria with tech experts, science specialists and young professionals.
Check out our upcoming events:
Infineon iHub
-
Master Thesis: Design, Layout and Characterization
vor 2 Wochen
Villach, Kärnten, Österreich Infineon Technologies VollzeitDuring your thesis project, we expect you to become a growing expert for design and layout of analog and digital circuits in microelectronic technologies, also performing the characterization measurements foster you to become familiar with the circuits test and statistical analysis. The overall goal of this thesis is a full development of the self-contained...
-
Master Thesis: Measurement Techniques for Next
vor 1 Monat
Villach, Österreich Infineon Technologies VollzeitAt KAI (Kompetenzzentrum Automobil - und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...
-
Master Thesis
vor 2 Wochen
Villach, Kärnten, Österreich Silicon Austria Labs VollzeitYour future responsibilities:In today's world, point-of-care devices such as glucose monitors have become ubiquitous, but their disposal contributes significantly to environmental waste. At SAL, we aim to address this issue by designing eco-friendly point-of-care devices fabricated using scalable technologies, particularly printing on biodegradable...
-
Master Thesis: Measurement Techniques for Next
vor 2 Wochen
Villach, Kärnten, Österreich Infineon Technologies VollzeitAt KAI (Kompetenzzentrum Automobil- und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...
-
Villach, Österreich Infineon Technologies VollzeitYour tasks in this Thesis will be as follows: - **Experimental test sample preparation **using the state-of-the-art wafer fabrication technologies - **Interface strength measurement **under quasi-static tensile and shear forces - **Crack propagation measurements **under cyclic loads - Fracture **surface analysis **in collaboration with fractography...
-
Master Thesis: Asynchronous Logic Design
Vor 6 Tagen
Villach, Österreich Infineon Technologies VollzeitYou love technology, a dynamic environment and want to be part of state-of-the-art developments? Infineon Power & Sensor Systems (PSS) delivers future-oriented solutions to provide cutting-edge data transport and to make tools and systems smarter, smaller, lighter and more energy-efficient. Do you have an affinity for product development in the semiconductor...
-
Master Thesis: Material Interface Characterization
vor 2 Wochen
Villach, Kärnten, Österreich Infineon Technologies VollzeitYour tasks in this Thesis will be as follows:Experimental test sample preparation using the state-of-the-art wafer fabrication technologies- Interface strength measurement under quasi-static tensile and shear forces- Crack propagation measurements under cyclic loads Fracture surface analysis in collaboration with fractography expertsThis thesis has to be...
-
Master Thesis: Transmission Electron Microscopy of
vor 2 Wochen
Villach, Kärnten, Österreich Infineon Technologies VollzeitThis thesis will focus on the characterization of the interface betweenSiC andTiAl3 bytransmission electron microscopy (TEM) .The following tasks are involved during the course of this work: Sample preparation for TEM via focused ion beam (FIB) Characterization of TiAl3/SiC heterostructures by TEM Process analysis in collaboration with technology...
-
Master Thesis: Daphne
vor 3 Wochen
Villach, Kärnten, Österreich Infineon Technologies VollzeitAt KAI GmbH, you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers in such diverse areas as hard- and software design, simulation, modeling and semiconductor technology. We work in close cooperation with universities and research facilities supporting your academic education, whereas our...
-
Master Thesis
vor 1 Monat
Villach, Österreich Silicon Austria Labs Vollzeit**Your future responsibilities**: In today’s world, point-of-care devices such as glucose monitors have become ubiquitous, but their disposal contributes significantly to environmental waste. At SAL, we aim to address this issue by designing eco-friendly point-of-care devices fabricated using scalable technologies, particularly printing on biodegradable...
-
Master Thesis
vor 2 Wochen
Villach, Österreich Silicon Austria Labs Vollzeit**Your future responsibilities**: In today's world, point-of-care devices such as glucose monitors have become ubiquitous, but their disposal contributes significantly to environmental waste. At SAL, we aim to address this issue by designing eco-friendly point-of-care devices fabricated using scalable technologies, particularly printing on biodegradable...
-
Master Thesis: Design of a Sensor Fusion Network to
vor 2 Wochen
Villach, Österreich Infineon Technologies VollzeitAt KAI (Kompetenzzentrum Automobil - und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...
-
Master Thesis: Revving Up Resilience: Modelling of
vor 4 Wochen
Villach, Österreich Infineon Technologies VollzeitAt KAI, we create reliability test methods and systems. For an **existing power distribution test system **, we plan to extend the functionality in the direction of **mimicking fail-operational **and **highly available power distribution topologies **and build up a **system-level model within Matlabs Simscape **. Therefore, during your thesis project, we...
-
Master Thesis
vor 2 Wochen
Villach, Kärnten, Österreich Silicon Austria Labs VollzeitThe topic of the master thesis is focused on experimental work on Electrohydrodynamic (EHD) printer. The EHD printer in question is a beyond state-of-the-art laboratory prototype and offers the possibility to be a part of the ground - breaking research activities. The objective of the thesis is to develop and establish printing process for different types of...
-
Master Thesis: Design of a Sensor Fusion Network to
vor 2 Wochen
Villach, Kärnten, Österreich Infineon Technologies VollzeitAt KAI (Kompetenzzentrum Automobil- und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...
-
Master Thesis: Daphne
vor 2 Wochen
Villach, Österreich Infineon Technologies VollzeitAt KAI GmbH, you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers in such diverse areas as hard - and software design, simulation, modeling and semiconductor technology. We work in close cooperation with universities and research facilities supporting your academic education, whereas our...
-
Master Thesis: Revving Up Resilience: Modelling of
vor 2 Wochen
Villach, Kärnten, Österreich Infineon Technologies VollzeitAt KAI, we create reliability test methods and systems. For an existing power distribution test system , we plan to extend the functionality in the direction of mimicking fail-operational and highly available power distribution topologies and build up a system-level model within Matlabs Simscape .Therefore, during your thesis project, we expect you to become...
-
Villach, Kärnten, Österreich Infineon Technologies VollzeitDo you want to deepen your knowledge by getting some work experience and as cherry on top doing your master thesis with a future-oriented company on a real-life topic? The KAI Competence Center for Automotive and Industrial Electronics was founded in 2006, is a 100% subsidiary of Infineon, and is located in the Villach Technology Park. The focus of our...
-
Master Thesis: Programming Methodology for Infineon
vor 3 Wochen
Villach, Österreich Infineon Technologies VollzeitAt KAI, we create reliability test methods and systems. To reduce our development time, we want to **extend **our **existing rapid prototyping workflow **with the ability to **program **the **Infineon AURIX controller. **The MATLAB/Simulink-based workflow will have to include existing software and controller concepts to fit into the existing test system...
-
Master Thesis: Investigating The Effects of
vor 1 Woche
Villach, Österreich Infineon Technologies VollzeitAt KAI (Kompetenzzentrum Automobil - und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...