Master Thesis: Investigating The Effects of

The topic of the master thesis is focused on experimental work on Electrohydrodynamic (EHD) printer. The EHD printer in question is a beyond state-of-the-art laboratory prototype and offers the possibility to be a part of the ground - breaking research activities. The objective of the thesis is to develop and establish printing process for different types of...

Your future responsibilities:This master's thesis focuses on the experimental realization and validation of a photonics-based rain sensor. Cutting-edge technologies are applied to analyze the effects of the interaction of light with raindrops. Based on a novel disdrometer concept a measurement system shall be realized and used for laboratory experiments and...

Your future responsibilities:In today's world, point-of-care devices such as glucose monitors have become ubiquitous, but their disposal contributes significantly to environmental waste. At SAL, we aim to address this issue by designing eco-friendly point-of-care devices fabricated using scalable technologies, particularly printing on biodegradable...

At KAI GmbH, you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers in such diverse areas as hard- and software design, simulation, modeling and semiconductor technology. We work in close cooperation with universities and research facilities supporting your academic education, whereas our...

This thesis will focus on the characterization of the interface betweenSiC andTiAl3 bytransmission electron microscopy (TEM) .The following tasks are involved during the course of this work: Sample preparation for TEM via focused ion beam (FIB) Characterization of TiAl3/SiC heterostructures by TEM Process analysis in collaboration with technology...

At KAI (Kompetenzzentrum Automobil- und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...

During your thesis project, we expect you to become a growing expert for motor drive systems for the fast-growing market ofautonomous robotics. The overall goal of this thesis is theinvestigation of system losses of a motor drive system consisting of a wide bandgap inverter stage as well as a motor and control unit.This means you will need to acquire some...

Do you have an affinity for power electronics and programming and are close to finishing your studies in Electrical Engineering, Robotics or a related field? Infineon Power & Sensor Systems (PSS) delivers future-oriented solutions to provide cutting-edge data transport and to make tools and systems smarter, smaller, lighter and more energy-efficient....

At KAI, we create reliability test methods and systems. For an existing power distribution test system , we plan to extend the functionality in the direction of mimicking fail-operational and highly available power distribution topologies and build up a system-level model within Matlabs Simscape .Therefore, during your thesis project, we expect you to become...

Your future responsibilities:Magnetic sensor systems are used to measure observables of interest through magnetic field detection. The aim of this project is to develop a magnonics based devices for the detection of magnetic fields by exploiting innovative physical effects occurring in magnetic nanostructures.The design of the sensors is mainly done by...

At KAI (Kompetenzzentrum Automobil- und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...

Your tasks in this Thesis will be as follows:Experimental test sample preparation using the state-of-the-art wafer fabrication technologies- Interface strength measurement under quasi-static tensile and shear forces- Crack propagation measurements under cyclic loads Fracture surface analysis in collaboration with fractography expertsThis thesis has to be...

During your thesis project, we expect you to become a growing expert for design and layout of analog and digital circuits in microelectronic technologies, also performing the characterization measurements foster you to become familiar with the circuits test and statistical analysis. The overall goal of this thesis is a full development of the self-contained...

At KAI, we create reliability test methods and systems. To reduce our development time, we want to extend our existing rapid prototyping workflow with the ability to program the Infineon AURIX controller. The MATLAB/Simulink-based workflow will have to include existing software and controller concepts to fit into the existing test system landscape....

Do you want to deepen your knowledge by getting some work experience and as cherry on top doing your master thesis with a future-oriented company on a real-life topic? The KAI Competence Center for Automotive and Industrial Electronics was founded in 2006, is a 100% subsidiary of Infineon, and is located in the Villach Technology Park. The focus of our...

Do you want to deepen your knowledge by getting some work experience and as cherry on top doing your master thesis with a future-oriented company on a real-life topic? The KAI Competence Center for Automotive and Industrial Electronics was founded in 2006, is a 100% subsidiary of Infineon, and is located in the Villach Technology Park. The focus of our...

In your new role you will:Acquire some special knowledge about state-of-the-art drones and their propulsion systems: Develop a feasibility study of a fuel cell driven drone including optimization of required subcomponents and subsystems:Validate the simulation results with real-world experiments of sub-systems in the laboratory (DCDC-Converter, Temperature...

Your future responsibilities:The main tasks consist of: Literature review on beam steering geometries and performance Actuation of sensor array and acoustic measurements Data processing Exploration of realtime steering solutionsYour profile: Master student in Electrical Engineering (or similar) Basic experience with electronic laboratory equipment (e.g.,...

In your new role you will:Gain experience with ion beam tuning which is critical for each process specification change at implantation Work on an AI prediction model that estimates the tuning outcome for the consecutive implantation process as the first step ( part of your thesis ). The final goal is to extend it to predict outcomes for multiple upcoming...

In your new role you will:Work with Quantum mechanical simulations of SiC-based defects: Work on simulation models for precise magnetic field measurements:Support the design and fabrication of photonics and system-components: Support the SiC wafer fabrication in a professional cleanroomFurther InformationType of employment: Full-time (Flexible working hours...