Master Thesis: Revving Up Resilience: Modelling of Modern Fail-Operational and Highly Available ATV Power Systems

At KAI, we create reliability test methods and systems. For an existing power distribution test system , we plan to extend the functionality in the direction of mimicking fail-operational and highly available power distribution topologies and build up a system-level model within Matlabs Simscape .Therefore, during your thesis project, we expect you to become...

During your thesis project, we expect you to become a growing expert for design and layout of analog and digital circuits in microelectronic technologies, also performing the characterization measurements foster you to become familiar with the circuits test and statistical analysis. The overall goal of this thesis is a full development of the self-contained...

During your thesis project, we expect you to become a growing expert for motor drive systems for the fast-growing market ofautonomous robotics. The overall goal of this thesis is theinvestigation of system losses of a motor drive system consisting of a wide bandgap inverter stage as well as a motor and control unit.This means you will need to acquire some...

Do you have an affinity for power electronics and programming and are close to finishing your studies in Electrical Engineering, Robotics or a related field? Infineon Power & Sensor Systems (PSS) delivers future-oriented solutions to provide cutting-edge data transport and to make tools and systems smarter, smaller, lighter and more energy-efficient....

This thesis will focus on the characterization of the interface betweenSiC andTiAl3 bytransmission electron microscopy (TEM) .The following tasks are involved during the course of this work: Sample preparation for TEM via focused ion beam (FIB) Characterization of TiAl3/SiC heterostructures by TEM Process analysis in collaboration with technology...

At KAI GmbH, you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers in such diverse areas as hard- and software design, simulation, modeling and semiconductor technology. We work in close cooperation with universities and research facilities supporting your academic education, whereas our...

The topic of the master thesis is focused on experimental work on Electrohydrodynamic (EHD) printer. The EHD printer in question is a beyond state-of-the-art laboratory prototype and offers the possibility to be a part of the ground - breaking research activities. The objective of the thesis is to develop and establish printing process for different types of...

At KAI (Kompetenzzentrum Automobil- und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...

In your new role you will:Acquire some special knowledge about state-of-the-art drones and their propulsion systems: Develop a feasibility study of a fuel cell driven drone including optimization of required subcomponents and subsystems:Validate the simulation results with real-world experiments of sub-systems in the laboratory (DCDC-Converter, Temperature...

Your tasks in this Thesis will be as follows:Experimental test sample preparation using the state-of-the-art wafer fabrication technologies- Interface strength measurement under quasi-static tensile and shear forces- Crack propagation measurements under cyclic loads Fracture surface analysis in collaboration with fractography expertsThis thesis has to be...

Your future responsibilities:In today's world, point-of-care devices such as glucose monitors have become ubiquitous, but their disposal contributes significantly to environmental waste. At SAL, we aim to address this issue by designing eco-friendly point-of-care devices fabricated using scalable technologies, particularly printing on biodegradable...

At KAI (Kompetenzzentrum Automobil- und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...

At KAI (Kompetenzzentrum Automobil- und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...

In your new role you will:Work with Quantum mechanical simulations of SiC-based defects: Work on simulation models for precise magnetic field measurements:Support the design and fabrication of photonics and system-components: Support the SiC wafer fabrication in a professional cleanroomFurther InformationType of employment: Full-time (Flexible working hours...

In your new role you will:Development of on-chip photonics for trapped-ion quantum processors: Simulation of waveguides based on patterned dielectrics , like SiN or AlO Fabrication of photonic test structuresFurther InformationType of employment: Temporary / Full-time (flexible working hours from Monday to Friday between 6 a.m. and 7 p.m.)Duration: 12...

Your future responsibilities:This master's thesis focuses on the experimental realization and validation of a photonics-based rain sensor. Cutting-edge technologies are applied to analyze the effects of the interaction of light with raindrops. Based on a novel disdrometer concept a measurement system shall be realized and used for laboratory experiments and...

Do you want to deepen your knowledge by getting some work experience and as cherry on top doing your master thesis with a future-oriented company on a real-life topic? The KAI Competence Center for Automotive and Industrial Electronics was founded in 2006, is a 100% subsidiary of Infineon, and is located in the Villach Technology Park. The focus of our...

In your new role you will:Target system demonstrators based on MEMS products and multi**:- channel signal processing platforms **, which will allow you to gain experience in hardware design Participate and contribute to IC design and simulation **as well as MEMS development **activities at the edge of current technology in a global semiconductor leader like...

At KAI, we create reliability test methods and systems. To reduce our development time, we want to extend our existing rapid prototyping workflow with the ability to program the Infineon AURIX controller. The MATLAB/Simulink-based workflow will have to include existing software and controller concepts to fit into the existing test system landscape....

Your future responsibilities:Considering on a real-word smart home use case, we will focus in particular on strengthening the classification and tracking of objects in picture sequences showing the inside of refrigerators. Extending on our available Concept Bottleneck models that integrate deep learning algorithms (Mask R-CNN networks) with structural...