Master Thesis: System Analysis of Wide Bandgap Motor Drives

During your thesis project, we expect you to become a growing expert for motor drive systems for the fast-growing market ofautonomous robotics. The overall goal of this thesis is theinvestigation of system losses of a motor drive system consisting of a wide bandgap inverter stage as well as a motor and control unit.This means you will need to acquire some...

Your future responsibilities:In today's world, point-of-care devices such as glucose monitors have become ubiquitous, but their disposal contributes significantly to environmental waste. At SAL, we aim to address this issue by designing eco-friendly point-of-care devices fabricated using scalable technologies, particularly printing on biodegradable...

At KAI GmbH, you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers in such diverse areas as hard- and software design, simulation, modeling and semiconductor technology. We work in close cooperation with universities and research facilities supporting your academic education, whereas our...

The topic of the master thesis is focused on experimental work on Electrohydrodynamic (EHD) printer. The EHD printer in question is a beyond state-of-the-art laboratory prototype and offers the possibility to be a part of the ground - breaking research activities. The objective of the thesis is to develop and establish printing process for different types of...

At KAI, we create reliability test methods and systems. For an existing power distribution test system , we plan to extend the functionality in the direction of mimicking fail-operational and highly available power distribution topologies and build up a system-level model within Matlabs Simscape .Therefore, during your thesis project, we expect you to become...

This thesis will focus on the characterization of the interface betweenSiC andTiAl3 bytransmission electron microscopy (TEM) .The following tasks are involved during the course of this work: Sample preparation for TEM via focused ion beam (FIB) Characterization of TiAl3/SiC heterostructures by TEM Process analysis in collaboration with technology...

Do you want to deepen your knowledge by getting some work experience and as cherry on top doing your master thesis with a future-oriented company on a real-life topic? The KAI Competence Center for Automotive and Industrial Electronics was founded in 2006, is a 100% subsidiary of Infineon, and is located in the Villach Technology Park. The focus of our...

At KAI (Kompetenzzentrum Automobil- und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...

During your thesis project, we expect you to become a growing expert for design and layout of analog and digital circuits in microelectronic technologies, also performing the characterization measurements foster you to become familiar with the circuits test and statistical analysis. The overall goal of this thesis is a full development of the self-contained...

Your future responsibilities:This master's thesis focuses on the experimental realization and validation of a photonics-based rain sensor. Cutting-edge technologies are applied to analyze the effects of the interaction of light with raindrops. Based on a novel disdrometer concept a measurement system shall be realized and used for laboratory experiments and...

Your tasks in this Thesis will be as follows:Experimental test sample preparation using the state-of-the-art wafer fabrication technologies- Interface strength measurement under quasi-static tensile and shear forces- Crack propagation measurements under cyclic loads Fracture surface analysis in collaboration with fractography expertsThis thesis has to be...

In your new role you will:Acquire some special knowledge about state-of-the-art drones and their propulsion systems: Develop a feasibility study of a fuel cell driven drone including optimization of required subcomponents and subsystems:Validate the simulation results with real-world experiments of sub-systems in the laboratory (DCDC-Converter, Temperature...

Do you want to deepen your knowledge by getting some work experience and as cherry on top doing your master thesis with a future-oriented company on a real-life topic? The KAI Competence Center for Automotive and Industrial Electronics was founded in 2006, is a 100% subsidiary of Infineon, and is located in the Villach Technology Park. The focus of our...

At KAI (Kompetenzzentrum Automobil- und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...

At KAI, we create reliability test methods and systems. To reduce our development time, we want to extend our existing rapid prototyping workflow with the ability to program the Infineon AURIX controller. The MATLAB/Simulink-based workflow will have to include existing software and controller concepts to fit into the existing test system landscape....

At KAI (Kompetenzzentrum Automobil- und Industrieelektronik GmbH), you will perform your thesis project in an industrial research environment, guided and supported by experienced researchers. We work in close cooperation with universities and research facilities supporting your academic education, whereas our industrial partner Infineon offers interesting...

In your new role you will:Work with Quantum mechanical simulations of SiC-based defects: Work on simulation models for precise magnetic field measurements:Support the design and fabrication of photonics and system-components: Support the SiC wafer fabrication in a professional cleanroomFurther InformationType of employment: Full-time (Flexible working hours...

Your future responsibilities:Magnetic sensor systems are used to measure observables of interest through magnetic field detection. The aim of this project is to develop a magnonics based devices for the detection of magnetic fields by exploiting innovative physical effects occurring in magnetic nanostructures.The design of the sensors is mainly done by...

Your future responsibilities:Silicon Austria Labs (SAL) is looking for a Master student for a 6 month contract. This role is generally responsible for the design and implementation of FPGA systems under the guidance of a senior member of staff. This is an ideal position for a recent graduate (or in the process of graduating) who is looking to get into FPGA...

We are offering a doctoral thesis in the field of trapped-ion quantum computing. As part of our growing ion trap systems team, you will develop trapped-ion quantum processing units. In particular, your technology development work will focus on ion traps on structured glass substrate, which is a preferred material for academic research groups due to its ease...